Ruby's Chair

It didn’t start out Ruby’s chair. It just started out as a chair, very loosely inspired by stick chairs, ladder backs and the chunker chairs by Jan Hendzel Studio. The finished chair does not remotely resemble chairs on the aforementioned list, and those chairs may not want a close association with this one. Too bad – that’s where the idea started and it still has a way travel until the thought is complete. This was the first of a concept and it has a ways to go. It turned into Ruby’s chair once she saw it, loved it and claimed it. She doesn’t hold her thoughts to herself, or withhold criticism if she dislikes something I’ve made. She has an art critic’s heart without a filter or empathy. She’s also honest and direct, and I appreciate that. The fact that she immediately staked claim to it was an encouragement.

A little about this chair: traditional undercarriage – with turned and shaved red oak legs ending with straight cylindrical tenons into the 2″ thick pine seat. Octagonal stretchers. The upper is all red oak: two bent posts mortised to accept two bent slats. The posts slide into a dovetail in the back of the pine seat. Then long screws were added to reinforce each posts. The seat was dry pine and everything else was green oak, dried as appropriate. I put it together, sanded it, then Ruby and I painted it a purple over white – Black Dog Salvage paint from Woodcraft that she selected.

My thoughts: this is a concept and I want to push it forward. I have a couple chair ideas that I want to pursue this year. This is the first of those ideas. I am studying and researching ladder back chairs, so that form is fresh in my mind. I love windsor chairs. Windsors influenced the base. The seat and back post connection idea came from the Hendzel chairs. My challenge: could I combine different designs into an attractive chair (still TBD)? Can I fashion and fit a back joint that holds to the rigors of chair stresses? That’s the key spot, functionally, where the chair will succeed or fail. Keeping it around our family will give it a good workout, as our kids stress test everything.

What worked: in general, the entire chair worked. It’s strong, solid and has a happy owner. It went together as planned. I used green wood, which was shaved and shaped, then dried out and put into the chair. Part of my aim was to design a chair that I could build in 10 hours or less, with minimal tools and machinery and noise. The basic concept worked – I’m in the middle of the second chair now

What I learned: This is what I really enjoyed in making this chair. I learned a ton, but it wasn’t until I made design decision and made the chair did those lessons appear. I’ll go through a few here. They’re listed as flaws and probably shouldn’t be:

  • the stretchers are too high
  • the front legs kick forward too much and outwards too little
  • it ended up short, with the seat about 16″ off the floor.
  • once the seat is kicked back, the leg angles on the front appears to match the back legs
  • the posts and bends are not correct
  • seat – not thick enough
  • the balance and proportions are off – posts a little heavy, legs could use more mass
  • the back post do not bend in the most comfortable of spots – not horrible, but could be better
  • the green wood – drying the dovetail on thick material lead to internal checking on the lower part of the post

There’s more to add to the list but that’s essentially all aspects of the chair that can be improved. And I still like it, so I’ll see where the next one leads me. Some are easy changes (like leg angles and adjusting proportions), others will be trickier (achieving the right upper form and comfort). I’m glad to have a challenge to dive into right now with all the uncertainty outside the shop walls. Hoping the same for all of you.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s